SAG960A Pro Series Max Flow 770 gpm
Designed to treat single pass flows up to 1,108,800 gallons per day at a minimum of 45 mJ/cm2 at 95%T. The SAG960A can effectively disinfect water for drinking, pools, larger spas, small sewage treatment, recovery water, irrigation water, fracking water, farm wells and wells with coliforms and other commercial applications. The SAG960A uses low pressure high output Amalgam lamp technology to achieve a 4 log reduction for Crytosporidum and other similar pathogens in water. Also chloramine destruction. The SAG960A is designed with a unique double sleeve seal quick disconnect that allows for easy access to lamps and sleeves and inspection of sleeves while taking up very limited space as an in-line system. We offer this system in both U and Z configuration that provides a significant advantage for those applications where there is limited space. The SAG960A easily retrofits most any application.
The SAG960A also offers additional killing power due to the highly polished (reflective) interior wall of the reactor, a science we have used for 20 plus years. This new reactor design allows the best benefit ever with our newly designed multiple wave length lamps that will perform at maximum 254nm and 185nm in water temps up to 104 degrees. The 254nm is approximately 30% greater than Medium Pressure systems. These new lamps out last regular low pressure lamps by 4000 hours and medium pressure lamps by 7000 hours. The system offers some impressive oxidative capabilities as well.
There is no need for expensive automated wipers on our SAG960A as our Patented Quick Disconnect and double sealed quartz sleeve allows access and inspection of sleeves in seconds for complete and thorough cleaning and even wiping several sleeves in just minutes. This is huge and can save you large repair cost. Have peace of mind knowing that the sleeves are actually clean and there are no sleeve fractures. Much less up front and operating cost much less than medium pressure, longer lasting and better built than most low pressure systems and far superior to PVC or other plastic systems. The SAG960A is designed and built to work in freshwater and saltwater, pools, low-flow sewage, fracking water, fountains, spas, ponds, zoos, aquariums, and many other applications. For quality and dependability you can rely on, choose SENTRY UV. Call to discuss your needs.
- Watts 960
- Liner > 316-L stainless steel
- Flow Rate (gpm) > ~770 gallons per minute
- Flow Rate (daily) > 1,108,800 gallons per day