PRO-SENTRY AQUA GUARD™ UV 1200 WATTS

Designed to treat single pass flows up to 1,296,000 gallons per day at a minimum of 45 mJ/cm2. The SAG1200-A can effectively disinfect water for drinking, pools, larger spas, low sewage treatment, recovery water, irrigation water, Fracking water, and other commercial applications.


The SAG1200-A uses low pressure high output Amalgam lamp technology to achieve a 4 log reduction for 
Crytosporidum and other similar pathogens in water, also chloramines destruction. The SAG1200-A is designed with a unique patented quick disconnect and double sealed sleeve that allows for easy access, cleaning and inspection of sleeves while taking up a very limited space as an in-line system. This provides a significant advantage for those applications where there is limited space. The SAG1200-A easily retrofits most any application.

 

The SAG1200-A also offers additional killing power due to the highly polished (reflective) interior wall of the reactor a science we have used for 20 plus years. This new reactor design allows for the best benefit ever with our newly designed multiple wave length lamps that will perform at maximum 254nm and 185nm in water temps up to 130 degrees. The 254nm is approximately 30% greater than MP systems.These new lamps out last regular low pressure lamps by 4000 hours and medium pressure lamps by 7000 hours. The system offers impressive oxidative capabilities as well. 

 

There is no need for expensive automated wipers on our SAG1200-A as our Patented Quick Disconnect double sealedsleeve that allows access to sleeves in seconds for complete and thorough cleaning and sleeve inspection while wiping several sleeves in just minutes. This is huge and can save you large repair cost. Have peace of mind knowing that the sleeves are actually clean and there are no sleeve fracturesMuch less up front  and operating cost than medium pressure, longer lasting and better built than most  low pressure systems and far superior to PVC systems or other plastic systems. The SAG1200-A is designed and built to work in freshwater and saltwater pools, low-flow sewage, Fracking water, fountains, spas, ponds, zoos, aquariums, and many other applications. For quality and dependability you can rely on, choose SENTRY UV. Call to discuss your needs.

 

Technical Specifications > Watts1200

 

Liner > 316-L stainless steel

 

Flow Rate (gpm) > ~900 gallons per minute minimum rate

 

Flow Rate (daily) > 1,296,000 gallons per day